In the previous part I built a dolly system for moving the scaffolding around and fitted clips to the ends of the working platform to stop it sliding out. In this final part of the main series I’ll fit the guardrail system and build a lifting mechanism to get the scaffold up on to the …
Month: July 2015
In part six of this series on building a homemade scaffolding tower I built the platform and had a test climb of the tower. In this part I build and install the dolly system to move the tower and fit clips to the end of the platform.
In part five of this series I joined the long sides together by fitting the rungs and then added some additional bracing at the bottom of the tower to stop it twisting. In this part I build and fit the platform and have a test climb.
In part four of this series I completed the long sides of the scaffolding tower. In this part I’ll build the shorter sides which provide the rungs which are used to climb the tower and support the platform.
In part three I prepared the legs, made some jigs and cut the rung sockets. In this part I will attach the stretchers and cross bracing thus completing one side.
In part two of this series I looked at some calculations and drew up a parts list. In this part I will start the build by constructing the sides of the tower.
In part one of this series on making your own homemade scaffolding tower I discussed the research and design aspects of building the tower. In part two I perform a few quick calculations to prove the platform will be strong enough and put together a parts list for the material purchase.
A few months ago I was faced with the challenge of taking down an old extension before it fell down on it’s own. Although I’ve tackled small building projects before, like fitting a new doorway or building an internal wall, this was the first time I was tackling a project that you could really call …